| TECHNICAL SPECIFICATIONS | |
|---|---|
| 4 Way Protection Circuit | Thermal, Voltage, Speaker, DC |
| Power @2 Ohm (14.4V) | 150W x 4 |
| Power @4 Ohm (14.4V) | 95W x 4 |
| Power (Bridged) @4 Ohm (14.4V) | 300W x 2 |
| Operating Voltage | 9V–16V |
| Idling Current (Power On) | 700mA |
| Frequency Response | 10Hz–26kHz |
| Signal to Noise Ratio (SNR) | 85dB |
| THD+N (@1W) | <0.06% |
| Input Sensitivity (High Level) | 230mV-12V |
| Crossover LPF | 30Hz – 300Hz |
| Crossover HPF | 30Hz – 300Hz |
| Clip Indication | 3.7% |
| Fuse Rating | 50A |
| Dimensions | 158mm x 136.5mm x 53mm |
Amplifier DII700.4
The small size of Recoil DII series amplifiers might cause some concern, but that fades the moment they’re connected to an audio system. Utilizing the latest Class D technologies, these ultra-compact DII series amplifiers are designed to deliver huge audio power with incredible efficiency and above-average quality. For your convenience, the DII amplifiers’ controls are located on top of the amplifier, under a small panel.
• Recoil’s proprietary Class D technology
• Stable 4/2 Ohm multi-impedance power
• 4 Ohm bridgable
• Selectable operation mode (REM, VOX, DC)
• Control panel located on the top surface
• 2/4-channel input switch
• RCA pass-through outputs
• Clipping detection and clipping indicator LEDs
• Mono amplifiers are equipped with a remote bass control
